Richa Machine Tools Richa Machine Tools
 
  
 
 
Home | Contact
 
  HOME ABOUT US PRODUCTS CONSTRUCTION CONTACT FEEDBACK EMAIL US
 
   
OUR PRODUCTS
   
RMT 13. m x m
RMT 20. m x m
RMT 25. m / m x 8” - Centre
RMT 25 / 40  m / m  x 10” - Centre
RMT 25 / 40  m / m  x 15” - Centre
RMT 32 / 40 m / m x 12” - Centre
RMT Radial 25 m / m  x 450 - centre
RMT Radial 25 m / m x 600 - Centre
RMT Radial 40 m / m  x 800 - Centre
 
Construction
 
Head :
Made from close-grained cast iron, accurately bored, Reamer and Honned in perfect parallels between the column and spindle. An easy clamping device is fitted for locking it on the column.
 
Spindle :
Made from forged steel to with standard distortion. It is balanced and mounted on taper roller bearings which drive through 6 spindle broached sleeve V-belt pulley. The additional four speed are obtained from gear set.
 
Quill :
Integrally cast from high tensile graded casting, machined and ground finished and is operated by a pinion controlled four spook end star well.
 
Table :
Proportionately designed for rigidity and sufficient surface area is provided to hold down job. It can be vertically lowered or raised by means of worm and rack. Tee-Slots are provided to hold the heavy jobs.
 
Base :
This is of sturdy design and provides sufficient area for Heavy jobs. Tee-Slots are provided for convenient holding. Provision has been made for a water channel around the working space.
 
HOME | ABOUT US | PRODUCTS | CONSTRUCTION | CONTACT | FEEDBACK | EMAIL US
 
Copyrights©2009 - 2010, All Rights Reserved by Richa Machine Tools.